220V 3000Rpm 400w Bldc Motors With RS485 Controller driver board
JK86BLS71-24+ driver board with RS485, high and low voltage safety isolation; vector non-inductive FOC motor control, 400W 220VAC, power up to 400w
1.Specification of brushless dc motor:
Product Name: Brushless DC MotorNumber of Phase: 3 Phase
Number of Poles: 4 Poles /8 Poles /10 Poles
Rated Voltage: 24v /36v /48v /310v
Rated Speed: 3000rpm /4000rpm /or customized
Rated Torque: Customized
Rated Current: Customized
Rated Power: 23w~2500W
| Model | JK86BLS71-24 |
| Voltage | 220V |
| Torque | 0.7N.m |
| Speed | 3000Rpm |
| Current | 6.3A |
| Power | 400w |
| Body length | 84.5mm |
| Type | bldc motor with hallsensor |
Please note: Customization accept, such as encoder, various gearbox, brake, or other parameters customer need.
| Product Series | Poles No. | Rated Voltage | Rated Speed | Rated Torque | Rated Power | Motor Length |
| 42mm BLDC Motor | 8 | 24v | 4000rpm | 0.0625~0.25N.m | 26~105w | 41~100mm |
| 57mm BLDC Motor | 4 | 36v | 4000rpm | 0.055~0.44N.m | 23~184w | 37~107mm |
| 60mm BLDC Motor | 8 | 48v | 3000rpm | 0.3~1.2N.m | 94~377w | 78~120mm |
| 80mm BLDC Motor | 4 | 48v | 3000rpm | 0.35~1.4N.m | 110~440w | 78~138mm |
| 86mm BLDC Motor | 8 | 48v | 3000rpm | 0.35~2.1N.m | 110~660w | 71~138.5mm |
| 110mm BLDC Motor | 8 | 310v | 3000rpm | 1.65~6.6N.m | 518~2073w | 83~173mm |
| 130mm BLDC Motor | 10 | 310v | 3000rpm | 2.39~11.94N.m | 750~2500w | 115~190mm |
| Above only for representative products, products of special request can be made according to the customer request. |
mtor
2.Electrical Specification of bldc motor:
| | | Model |
| Specification | Unit | JK86BLS58 | JK86BLS71 | JK86BLS84 | JK86BLS98 | JK86BLS125 |
| Number Of Phase | Phase | 3 |
| umber Of Poles | Poles | 8 |
| Rated Voltage | VDC | 48 |
| Rated Speed | Rpm | 3000 |
| Rated Torque | N.m | 0.35 | 0.7 | 1.05 | 1.4 | 2.1 |
| Rated Current | Amps | 3 | 6.3 | 9 | 11.5 | 18 |
| Rated Power | W | 110 | 220 | 330 | 440 | 660 |
| Peak Torque | N.m | 1.05 | 2.1 | 3.15 | 4.2 | 6.3 |
| Peak Current | Amps | 9 | 19 | 27 | 35 | 54 |
| Back E.M.F | V/Krpm | 13.7 | 13 | 13.5 | 13.7 | 13.5 |
| Torque Constant | N.m/A | 0.13 | 0.12 | 0.13 | 0.13 | 0.13 |
| Rotor Inertia | g.c㎡ | 400 | 800 | 1200 | 1600 | 2400 |
| Body Length | mm | 71 | 84.5 | 98 | 115.5 | 138.5 |
| Weight | Kg | 1.5 | 1.9 | 2.3 | 2.7 | 4 |
| Sensor | Honeywell |
| Insulation Class | B |
| Degree of Protection | IP30 |
| Storage Temperature | -25～+70℃ |
| Operating Temperature | -15～+50℃ |
| Working Humidity | <= 85% RH |
| Working Environment | No direct sunlight, non-corrosive gas, flammable gas, oil mist, no dust. |
| Altitude | 1000m or below |
3. Photo of JK86BLS71-24 With RS485 Controller driver board :
4.Produce equipment:
5.Production Process:
6.Customized of brushless electric motor:
- BLDC motor with fan
- BLDC motor with gearbox
- BLDC motor with encoder
- BLDC motor with brake
7.Advantages of square bldc motor 4000rpm:
Speed Stability
Hall-effect sensors built in the BLDC motor detect the change in polarity from an N pole to an S pole as the rotor is spinning. Based on the time between state changes, the rotor's speed is determined. This information is then fed to the drive circuit to adjust the speed of the switching sequence.
High Speed Operation
Brushed and brushless DC systems provide flat torque over a wide speed range while AC motors often lose torque as speed increases.
Product Tags:
|
|
220V 3000Rpm 400w Bldc Motors With RS485 Controller Driver Board Images
|
